We currently live in an area not served by cable or DSL, and our internet options are satellite or microwave internet. Microwave internet is the best choice for us because of the lower latency in the microwave signal - much better for video conferencing and working with distant co-workers in real time.
Microwave internet works by line-of-sight from a dish at the property in question to a microwave tower.
Right now Ryan and I are in the process of finding a new place to live, and I check line-of-sight from each place we look at to different microwave towers in the Bitterroot Valley, to make sure that we would have internet coverage if we lived there.
How to Calculate Line-of-sightTo calculate line-of-sight, first locate your point (in this case a house) using hillmap.com. Make sure you're on the Paths tab on Hillmap.
Click on the map at your first location, and then click on the point of your second location (in this case the microwave tower). Hillmap will draw a line between the two points.
|A path drawn between a house and a microwave tower|
The Paths tab is circled in purple, the Profile button is circled in red
If you have a clear line-of-sight, the graph will not have any big bumps between your two points. An obstructed line-of-sight will have big bumps between the two points, showing that there are hills in the way. Hills will block the microwave internet signal. The graph above shows a pretty clear line-of-sight.
This graph above shows an obstructed line-of-sight. Of course, this analysis only includes topography and not trees, towers or other obstacles that can block your line-of-sight. You can check the Satellite map on hillmap.com to see if the location you are looking at has thick tree cover, but a site visit is probably necessary to get a true idea of trees and other obstacles.
This Satellite image shows a thick band of trees on the hill just below the house I'm concerned about, indicating a possible blockage to the line-of-sight. If the tree tops are low enough, the signal may be able to pass.